33 3 260 Set Of Tools

WARNING: This page is about a different car, the 2007 BMW M5, 2007 BMW 550i, 2006 BMW M5, and 2006 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

Note: For removing and installing rear wheel bearings in wheel carrier and for fitting drive flange

Series: E31, E34, E38, E46/16, E52, E53, E60, E61, E67, E81, E83, E85, E86, E87, E90, E91, E92, E93, RR1

Storage location: B7, B8

SI number: 1 05 90 (207)

Order number: 33 3 260

Set of tools

Fig 1: Identifying Set Of Tools (33 3 260)

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

1 = 33 3 261 Spindle with 2 nuts

Note: Model series: E31, E34, E38, E46/16, E52, E53, E60, E61, E83, RR1

2 = 33 3 262 Spacer sleeve

Note: For removing wheel bearing from wheel carrier and installing drive flange Model series: E31, E34, E38, E46/16, E52, E53, E83

3 = 33 3 263 Adapter sleeve

Note: For removing wheel bearing from wheel carrier -Model series: E31, RR1

4 = 33 3 264 Adapter sleeve

Note: For installing wheel bearing in wheel carrier Model series: E31, E34, E38, E46/16, E52, E53, E83, RR1

5 = 33 3 265 Thrust washer

Note: For installing wheel bearing in wheel carrier - Model series: E31

6 = 33 3 266 Adapter sleeve

Note: For installing drive flange and removing wheel bearing Model series: E38, E52, E53, E60, E61, E83, RR1

7 = 33 3 267 Thrust washer

Note: For installing drive flange Model series: E31, E34, E38, E46/16, E52, E53

8 = 33 3 268 Support disk

Note: For installing wheel bearing Model series: E38, E52, E53, E60, E61, E83, RR1