33 2 200 Fixture

WARNING: This page is about a different car, the 2007 BMW M5, 2007 BMW 550i, 2006 BMW M5, and 2006 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

In conjunction with: 33 4 200, 33 5 070

Note: For removing and installing output shaft in drive flange as well as for removing front wheel bearing unit.

Series: E30, E31, E32, E34, E36, E36/2, E36/3, E36/5, E36/7, E36/C, E36tou, E38, E38/3, E39, E39PL, E39tou, E46, E52, E53, E60, E61, E63, E64, E65, E66, E67, E70, E83, E85, E86, E87, E90, E91, E92, E93, RR1, RR2

Order number: 33 2 200

Fixture

Consisting of:

1 = 33 2 201 Basic body

2 = 33 2 202 Counterholder

In conjunction with: 33 5 070

3 = 33 2 203 Spindle M20x1.5 / length 150 mm

Note: For pressing out. Model series: E30, E31, E32, E36, E38, E39, E46, E53, E65, E66, E67, E83, E85

4 = 33 2 204 Spindle M20x1.5 / length 180 mm

Note: For drawing in. Model series: E30

5 = 33 2 205 Spindle M20x1.5 / length 190 mm

Note: For drawing in. Connection: M27x1.5 Model series: E31, E52, E53, E60, E61, E65, E66, E67, E83

6 = 33 2 206 Spindle M20x1.5 / length 190 mm

Note: For drawing in. Connection: M24x1.5 Model series: E36, E46

7 = 33 2 207 Threaded piece

8 = 33 2 208 Nut with thrust bearing

Note: Model series: E30, E31, E32, E36, E38, E39, E46, E52, E53, E60, E61, E65, E66, E67, E83, E85, RR1