33 1 300 Rillex Tapered Roller Bearing Extractor

WARNING: This page is about a different car, the 2007 BMW M5, 2007 BMW 550i, 2006 BMW M5, and 2006 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Note: For bevel pinion and differential case (final drive) / for mounting sprocket wheel on crankshaft (M70) / for removing bearing inner race from drive flange (E36, E46)

Transmission: Rear axle differential type G, K, M

Storage location: B6, C6

Order number: 33 1 300

Rillex tapered roller bearing extractor

Fig 1: Identifying Rillex Tapered Roller Bearing Extractor (33 1 300)

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

1 = 33 1 301 Connecting piece with spindle

1 = 33 1 311 Gripper

2 = 33 1 312 Thrust piece

Note: For removing bearing inner race from drive flange - Series: E36/5

In conjunction with: 00 7 500

5 = 33 1 305 Thrust piece (old)

6 = 33 1 306 Thrust piece

7 = 33 1 307 Thrust piece

8 = 33 1 308 Thrust piece

9 = 33 1 309 Thrust piece

Note: For final drive and for mounting sprocket wheel on crankshaft (M70)

In conjunction with: 00 8 500