31 3 030 Press-In And Press-Out Tool

WARNING: This page is about a different car, the 2007 BMW M5, 2007 BMW 550i, 2006 BMW M5, and 2006 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

Note: For rubber bearings on trailing arm

Series: E60, E61, E63, E64, E65, E66, E67, E70, E81, E83, E87, E90, E91, E92, E93

Storage location: B46

SI number: 1 14 01 (766)

Order number: 31 3 030

Press-in and press-out tool

Consisting of:

1 = 31 3 031 Thrust piece

2 = 31 3 032 Bushing

Fig 1: Identifying Press-In And Press-Out Tool (31 3 030)

Courtesy of BMW OF NORTH AMERICA, INC.