31 51 020 Replacing Shaft Seal For Right Output Shaft

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2010 BMW 535xi, 2010 BMW 528xi, 2009 BMW 535xi, 2009 BMW 528xi, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

31 5 130

Necessary preliminary tasks:

Remove right output shaft

Lever shaft seal (1) with a screwdriver (2) out of bearing block (3).

Fig 1: Identifying Shaft Seal, Screwdriver And Bearing Block

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Protective sleeve (2) serves to protect the sealing lips of shaft seal (1) from being damaged when the output shaft is inserted into the bearing block.

Fig 2: Identifying Protective Sleeve And Shaft Seal

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Drive in shaft seal with special tool 31 5 130 as far as it will go.

Fig 3: Identifying Special Tool (31 5 130)

Courtesy of BMW OF NORTH AMERICA, INC.