65 77 602 Replacing sensor mat (OC3 mat) for passenger seat occupancy detector
WARNING: This page is about a different car, the 2010 BMW M5, 2009 BMW M5, 2008 BMW M5, 2007 BMW M5, and 2006 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
US/CDN front passenger seat (with OC3 mat) only:
The OC3 mat can only be removed in conjunction with the padding from the seat cover.
If OC3 mat or padding is defective, both parts may only be replaced together.
After fitting seat cover, enable OC3 mat with BMW diagnosis system.
The OC3 mat can only be removed in conjunction with the padding from the seat cover.
If OC3 mat or padding is defective, both parts may only be replaced together.
After fitting seat cover, enable OC3 mat with BMW diagnosis system.
The operation for removing the OC3 mat is described in:
- Removing PADDING FOR PASSENGER SEAT
Enabling seat occupancy detector (OC3 mat):
- Connect BMW programming system.
- ENCODE airbag control unit
- Clear fault memory if necessary