LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1182 (Seats -- Repair Instructions) >> Front Seat, Normal, Electric >> 52 14... Removing And Installing Outer Upper Rail Trim With Electric Anchor Fitting Tensioner (From 04/2004)

52 14... Removing And Installing Outer Upper Rail Trim With Electric Anchor Fitting Tensioner (From 04/2004)

WARNING: This page is about a different car, the 2010 BMW M5, 2009 BMW M5, 2008 BMW M5, 2007 BMW M5, and 2006 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.

Driver's seat only: 

NOTE:

Version with anchor fitting tensioner from 04/2004.

Lever trim (3) out of seat mechanism:

  1. upwards,
  2. slide towards rear and feed out of anchor fitting tensioner.

Installation: 

Secure plug connection with felt strip against unlocking.

Lock on plug connection to anchor fitting tensioner can be unlocked when trim is fitted.

Fig 1: Sliding Towards Rear And Feed Out Of Anchor Fitting Tensioner
G04742748Courtesy of BMW OF NORTH AMERICA, INC.