52 17... Removing And Installing/Replacing All Trims On Left Or Right Seat Rails

WARNING: This page is about a different car, the 2010 BMW M5, 2009 BMW M5, 2008 BMW M5, 2007 BMW M5, and 2006 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.

Trim, top rail, front:

Move seat backwards and upwards
Unclip front trim (1) towards top and detach towards top

Fig 1: Removing Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Trim, top rail, outer:

Move seat forwards and upwards
Unclip front trim towards top and detach towards rear

Fig 2: Moving Seat Forwards And Upwards

Courtesy of BMW OF NORTH AMERICA, INC.

Trim, bottom rail, front, outer:

Move seat backwards
Unclip trim tongue towards top, sliding trim towards front slightly
Pull inner trim section inwards slightly and unclip
Detach trim towards front from bottom rail

Installation:

Place trim on bottom rail and slide towards rear to engage, feeding in below trim, top rail, outer.

Fig 3: Unclipping Inner Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Trim, bottom rail, front, inner:

Move seat backwards
Unclip tongue (1) towards top and detach trim towards front

Fig 4: Unclipping Tongue

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Make sure hook (1) engages in slot (2).

Fig 5: Identifying Hook And Slot

Courtesy of BMW OF NORTH AMERICA, INC.

Trim, bottom rail, rear:

Move seat forwards
Unclip trim tongue towards top
Briefly pull inner trim section inwards
Detach trim towards rear from bottom rail

Fig 6: Removing Trim And Bottom Rail

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Clips and hooks must not be damaged.

Make sure trims are exactly seated.

After completing tasks, move seat and make sure that trim does not move.