33 55 040 Replacing Stabilizer Links For Stabilizer
WARNING: This page is about a different car, the 2010 BMW M5, 2009 BMW M5, 2008 BMW M5, 2007 BMW M5, and 2006 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
Release nut (1); if necessary, grip at Torx socket.
Installation:
Replace self-locking nut.
Release nut (2); if necessary, grip at Torx socket.
Remove stabilizer link.
Installation:
Replace self-locking nut.
Tighten to specified torque. See REAR AXLE -- TORQUE SPECIFICATIONS .