22 11 100 Replacing Right Engine Support Arm (S85)
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2010 BMW M6, 2010 BMW M5, 2009 BMW M6, 2009 BMW M5, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Secure engine in installation position. See 11 00 670 SECURING ENGINE IN INSTALLATION POSITION (S85) .
- Remove both front wheels.
- Lower front axle carrier.
Observe safety instructions on raising the vehicle. Read and follow operating instructions for lifting platform. Before driving onto a lifting platform, make sure there is sufficient ground clearance between the lifting platform and the car. The vehicle may only be raised with the lifting platform at the four jacking points. See 00...... LIFTING VEHICLE WITH A LIFTING PLATFORM (5-SERIES) or 00..... LIFTING VEHICLE WITH A LIFTING PLATFORM (6-SERIES) .
Release screws (1).
Remove engine support arm (2).
Tighten to specified torque, see 22 11 3AZ in 22 11 ENGINE MOUNTING .