11 22 513 Replacing Roller Bearing For Dual-Mass Flywheel

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2010 BMW M6, 2010 BMW M5, 2009 BMW M6, 2009 BMW M5, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 5 500
11 2 010
11 2 343
11 2 350

NOTE: Flywheel removed!

Position special tool 11 2 010 in roller bearing.

Twist out roller bearing with special tool 11 2 343.

Fig 1: Twisting Out Roller Bearing With Special Tool 11 2 343

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble special tools 11 2 350 and 00 5 500.

Drive in roller bearing with special tools 11 2 350 and 00 5 500 in direction of arrow as far as it will go.

Fig 2: Driving In Roller Bearing With Special Tools 11 2 350 And 00 5 500

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.