Removal & Installation (Front)
WARNING: This page is about a different car, the 2003 BMW 760Li, 2003 BMW 745i, and 2003 BMW 745Li. However, it is still accessible from the selected car via links, so may be relevant.
- Front seat belt pretensioners are part of seat belt buckle assembly. Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Disable air bag system. See DISABLING SYSTEM under DISABLING & ACTIVATING AIR BAG SYSTEM.
- Remove appropriate front seat. Remove outer seat trim panel. Disconnect seat belt buckle pretensioner harness connector. See Figure . Pretensioner mounting screw and seat belt buckle pretensioner.
- To install, reverse removal procedure. Tighten pretensioner mounting screw to specification. See TORQUE SPECIFICATIONS . Activate air bag system. See ACTIVATING SYSTEM under DISABLING & ACTIVATING AIR BAG SYSTEM.