LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1057 (Engine Electrical System - Tightening Torques) >> 62 Coolant Temperature >> 12 62 Coolant Temperature

12 62 Coolant Temperature

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2010 BMW M6, 2010 BMW M5, 2009 BMW M6, 2009 BMW M5, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - COOLANT TEMPERATURE

- Type Thread Tightening specification Measure
1AZ Temperature sensor to water flange (glow time/coolant temperature gauge) M21 - - 18 Nm
- M51 - - 13 Nm
2AZ Temperature switch (5.5°C / 17°C) to fuel filter/cylinder head M21 - - 18 Nm
3AZ Coolant temperature sensor (2-pin plug-in connection) S38/S50 - - 13 Nm
- S85 M12/1.52 - 13.5 Nm
- All / others - - 20 Nm
4AZ Remote thermometer sensor (2-pin plug-in connection) All - - 20 Nm
Remote thermometer sensor (4-pin plug-in connection) M62 - - 16 Nm
- S62 M12 x 1.5 - 14 Nm
5AZ Remote thermometer sensor on coolant flange S50 - - 18 Nm
6AZ Temperature sensor - air S38/S50 - - 13 Nm
7AZ Temperature sensor - oil S38/S50 - - 13 Nm
TIGHTENING TORQUE SPECIFICATION - COOLANT TEMPERATURE

- Type Thread Tightening specification Measure
1AZ Coolant temperature sensor S85 M12x1.5 - 14 Nm