11 23 Vibration Damper
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2010 BMW M6, 2010 BMW M5, 2009 BMW M6, 2009 BMW M5, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - VIBRATION DAMPER (1 OF 2)
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Torsion damper to crankshaft hub | S85 | M12x1.25 12.9 | 25 Nm | |
| Jointing torque | 60 Nm | |||
| 1. Angle of rotation | 40 ° | |||
| 2. Angle of rotation | 40 ° |
TIGHTENING TORQUE SPECIFICATION - VIBRATION DAMPER (2 OF 2)
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 3AZ Belt pulley / vibration damper to hub | S38 / B36 | M8 10.9 | 34 Nm | |
| N40 / N42 / N45 / N46 / S38 / B38 | M8 10.9 | 34 Nm | ||
| All / others | M8 | 22 Nm | ||
| 4AZ Belt pulley to vibration damper | S38 / B35 | M8 8.8 | 22 Nm | |
| S50 | M8 8.8 | 22 Nm | ||
| 5AZ Sprocket with hub or hub to crankshaft | M40 | M16 x 1.5 | Replace screw | 310 Nm |
| M42 / M43 / M43TU / M44 | M16 x 1.5 | Replace screw | 330 Nm | |
| 6AZ Hub to crankshaft | N40 / N42 / N45 / N46 | M16 x 1.5 | Replace screw | 300 Nm |