00 2 480 Measurement stand with clamp
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW M5, 2009 BMW M5, 2008 BMW M5, 2007 BMW M5, and 2007 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.
Engine: M10, M20, M20B25, M20B27, M21, M30, M30B34, M30Tur, M40, M41, M42 M43, M43TU, M44, M47, M47T2, M47TU, M50, M51, M52, M52TU, M54, M56, M57, M57D25, M57D30, M57T2, M57TU, M60, M62, M62VAN, M67, M67TU, M70, M73, M88, N40, N42, N45 N46, N52, N62, N62TU, N73, S14, S38, S50B30, S50B32, S50US, S52US, S54, S62, W10, W11, W17
SI number: 1 18 99(489)
Order number: 00 2 480
Measurement stand with clamp
Consisting of:
1 = 00 2 481 Clamping foot
2 = 00 2 482 Clamping piece
3 = 00 2 483 Shaft
4 = 00 2 484 Shaft