34 11 Front Brake E60
WARNING: This page is about a different car, the 2010 BMW M5, 2009 BMW M5, 2008 BMW M5, 2007 BMW M5, and 2006 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
TECHNICAL DATA - FRONT BRAKE E60
| Different thicknesses on brake linings | max. mm | 0.01 |
| Surface roughness of braking surfaces (precision-turned) | Ra μ | |
| Brake disc diameter Models: 520d 520i 523i 525i M54 525d |
mm | 310 |
| Brake disc diameter Models: 525i N52 530i M54 530d 630i 525ix 530ix |
mm | 324 |
| Brake disc diameter Models: 530i N52 545i 535d 645Ci 540i 550i |
mm | 348 |
| Wear warning from residual lining thickness | mm | 3.0 |
| Brake disk minimum thickness (MIN TH) stamped on brake disk body Models:520d 520i 525i 525d |
mm | 22.4 |
| Brake disk minimum thickness (MIN TH) stamped on brake disk body Models: 530i 530d 525ix 530ix |
mm | 28.4 |
| Brake disk minimum thickness (MIN TH) stamped on brake disk body Models:545i 645Ci 630i 540i |
mm | 28.4 |
| Brake disk minimum thickness (MIN TH) stamped on brake disk body Models:535d 550i |
mm | 34.4 |
| Max. machining limit per friction ring side (M models must not be machined!) | mm | 0.8 |