11 12 Cylinder Head With Cover S85
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2010 BMW M6, 2010 BMW M5, 2009 BMW M6, 2009 BMW M5, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
TECHNICAL DATA - CYLINDER HEAD AND CYLINDER HEAD COVER S85
| Cylinder head height: Original dimension and machining limit |
mm | 149 |
| Valve guides are not available as replacement parts. | - | - |
| Inside diameter of installed valve guide | - | - |
| Standard | mm | 5.0 +0.012 |
| Tilt clearance, maximum (wear between valve and valve guide) |
mm | cannot be measured |
| Bearing of camshaft | - | - |
| Guide bearing (width) | mm | 19.970 |