51 46 050 Removing and installing/replacing top trim on rear apron

Necessary preliminary tasks:

Release protective caps (1) and screws underneath.

Lever out expander rivets (2).

Lever out trim (3) inwards/upwards.

Installation:

Replace damaged protective caps (1) and expander rivets (2).

Make sure rear lid seal is correctly seated.

Fig 1: Releasing Protective Caps

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Guides (1) of trim (2) must not be damaged.

Fig 2: Identifying Guides And Trim

Courtesy of BMW OF NORTH AMERICA, INC.