LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> Electrical >> Gauges >> Body Equipment - Repair >> 24 trunk latch, locks >> 51 24 300 Removing and installing or replacing left or right gas strut for trunk lid

51 24 300 Removing and installing or replacing left or right gas strut for trunk lid

Necessary preliminary tasks: 

IMPORTANT: When working on the rear gas struts, there is a risk of paintwork damage in areas (A and B) of rear lid (1) and side panels (2).
Open and close carefully.
If necessary, remove rear lid.
Fig 1: Identifying Rear Lid And Side Panels
G04761032Courtesy of BMW OF NORTH AMERICA, INC.

Lever out both retaining springs (1).

Lever out gas strut (2) from ball pins of side panel and rear lid hinge (3) and remove.

Fig 2: Removing Gas Strut From Ball Pins Of Side Panel And Rear Lid Hinge
G04761033Courtesy of BMW OF NORTH AMERICA, INC.