51 16 041 Removing and installing/replacing cover cap on left or right door mirror

Necessary preliminary tasks: 

• Remove retaining ring on door mirror.

Release screws (1). Tightening torque, see 51 16 9AZ in .

Fig 1: Release Screws (1)

Release cover cap (1) from catches (2) and feed out in direction of arrow. Disconnect connector (3). Installation: Make sure wiring of door mirror light is correctly routed.

Fig 2: Release Cover Cap (1) From Catches (2) And Feed Out In Direction Of Arrow

Installation: Catches (1) on cover cap (2) must not be damaged. 3-Light, 4-Catches.

Fig 3: Catches (1) On Cover Cap (2) Must Not Be Damaged