51 61 Reinforcement, body

REINFORCEMENT, BODY - TIGHTENING TORQUES SPECIFICATION

		Type	Thread	Tightening specification	Measure
1AZ	Tension strut in engine compartment	E60 / E61 / E63 / E64	M8	Replace screws
				Screw connection again	27 Nm
				New component / initial screw connection	30.5 Nm
2AZ	Structural tension strut, front	E64	M12	Replace screws
				Jointing torque	100 Nm
				Torque angle	90 °
		E64	M6	Replace screws
				Jointing torque	8 Nm
3AZ	Tension strut to rear axle	E60 / M5, E61 / M5, E63 / M6, E64 / M6	M8	M8 8.8	24 Nm
				M8 10.9	30 Nm
		E61, E64	M12	Replace screws
				Jointing torque	100 Nm
				Torque angle	90 °
		E61, E64	M8	Nut	19 Nm
4AZ	Tension strut, rear axle, front	E61 / M5, E64 / M6	M12	Replace screws
				Jointing torque	100 Nm
				Torque angle	90 °
5AZ	Tension strut, rear axle, rear	E61 / M5, E64 / M6	M12	Replace screws
				Jointing torque	100 Nm
				Torque angle	90 °
6AZ	Cross strut/rear	E61, E64	M10	Nuts	41 Nm
				Screws	59 Nm
7AZ	Connection carrier to body	E60, E61	M8		24 Nm