51 45 031 Replacing instrument panel trim

Necessary preliminary tasks:

Unclip both heated-air duct trims (1) in direction of arrow and remove from instrument panel trim (3).

Unclip passenger-side vent (2) in direction of arrow and remove from instrument panel trim (3).

Fig 1: Uncliping Passenger-Side Vent

Courtesy of BMW OF NORTH AMERICA, INC.

Release clips (2).

Remove top steering column cover (1) in direction of arrow from instrument panel trim (3).

Release screws (4).

Remove driver's-side air duct (5) from instrument panel trim (3).

Fig 2: Removing Top Steering Column Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove passenger-side air duct (2) from instrument panel trim (3).

Fig 3: Identifying Passenger-Side Air Duct, Instrument Panel Trim And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Remove clips (1).

NOTE: Replace damaged clips (1):

Turn clip (1) with screwdriver to left by approx. 60 °.
Lever out clip (1) from below.

Fig 4: Removing Clips
Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove instrument panel function carrier (2) from instrument panel trim (3).

Removal all metal nuts (4) from instrument panel trim (3).

Fig 5: Identifying Instrument Panel Function Carrier, Instrument Panel Trim And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Version with head-up display:

Release screws (1).

Remove head-up display frame (2) in direction of arrow from instrument panel trim (3).

Fig 6: Removing Head-Up Display Frame From Instrument Panel Trim

Courtesy of BMW OF NORTH AMERICA, INC.