61 31 079 Removing and installing/replacing switch for hazard warning flashers/central locking
Special tools required:
- 64 1 020 . See HEATING AND AIR CONDITIONING - SPECIAL TOOLS .
IMPORTANT:
Risk of damage!
Protect middle fresh-air grille decorative trim in working area against damage, tape off if necessary.
Protect middle fresh-air grille decorative trim in working area against damage, tape off if necessary.
Lever out switch for hazard warning system/central locking (1) with special tool 64 1 020 and pull back.
Disconnect associated plug connection and remove switch for hazard warning flashers/central locking (1).