65 83 010 Removing and installing/replacing Car Communication Computer
IMPORTANT:
Read and comply with NOTES ON PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION)
.
NOTE:
Follow instructions for HANDLING OPTICAL FIBRES
.
Necessary preliminary tasks:
- Disconnect BATTERY NEGATIVE LEAD .
- Remove MIDDLE TRIM FOR INSTRUMENT PANEL .
Release screws (1).
IMPORTANT:
Do not scratch center console trim, cover if necessary.
Pull back Car Communication Computer (2) slightly.
Unlock associated plug connections and disconnect.
Remove Car Communication Computer (2).
Replacement:
Carry out PROGRAMMING/CODING .