12 51 150 Removing and installing/replacing wiring harness section for fuel injectors on left or right (N62, N62TU)

Necessary preliminary tasks:

Disconnect battery negative lead
Remove acoustic cover by unfastening 4 screws. Raise acoustic cover and remove towards front.

Fig 1: Identifying Acoustic Cover

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: The procedure is identical for both sides.
Illustrations show and descriptions refer to the left side.

Unfasten screws.

Unlock plug (1) and remove.

Unlock plugs on fuel injectors and disconnect.

Remove wiring harness.

Fig 2: Identifying Plug

Courtesy of BMW OF NORTH AMERICA, INC.

Check function of DME.