13 54 030 Removing and installing/sealing throttle valve assembly (N62, N62TU)

Necessary preliminary tasks: 

• Read out fault memory of DME control unit; if necessary, work through test schedules.
• Switch off ignition.
• Remove air intake hose  . 

Unlock plug (1) and remove.

Release screws.

Remove throttle assembly (2).

Fig 1: Identifying Throttle Assembly And Plug

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Replace sealing ring (1) of throttle assembly (2).

Fig 2: Identifying Sealing Ring And Throttle Assembly

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Now clear the fault memory.