51 16 210 Removing and installing/replacing trim for preselector lever

Version with automatic transmission:

Reach into trim (1) and unclip upwards from retainers (2).

Feed out trim (1) over preselector lever (3).

Fig 1: Identifying Trim And Retainers

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Make sure retainers (1) are correctly seated in associated mountings of trim (2).

Fig 2: Identifying Retainers And Mountings Of Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Version with automatic sport transmission:

Lever out gaiter (1) from catches (2) with special tool 00 9 341 .

Fig 3: Identifying Gaiter And Catches With Special Tool

Courtesy of BMW OF NORTH AMERICA, INC.

Reach into trim (1) and unclip upwards from retainers (2).

Feed out trim (1) upwards over gaiter (3), disconnect associated plug connection and remove trim (1).

Fig 4: Identifying Trim And Retainers

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Make sure retainers (1) are correctly seated in associated mountings of trim (2).

Replacement:

Fig 5: Identifying Retainers

Courtesy of BMW OF NORTH AMERICA, INC.