51 21 330 Removing and installing/replacing window cavity cover strip on inner front door

Necessary preliminary tasks:

Lever out cover (1) at rear slightly.

Start at rear with removal of window cavity cover strip (2).

Fig 1: Removing Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Pull off window cavity cover strip (1) towards top.

Replacement with Security version:

Cut window cavity cover strip (1) to length on B-pillar side to 680 mm.

Installation:

If necessary, replace faulty clips (3).

Insert window cavity cover strip (1) below cover (2).

Fig 2: Pulling Off Window Cavity Cover Strip

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Coat window cavity cover strip (1) with water before fitting.

Start with installation at front.

Fig 3: Identifying Window Cavity Cover Strip

Courtesy of BMW OF NORTH AMERICA, INC.