63 99 433 Replacing bulb for rear reading light

Necessary preliminary tasks: 

• Remove REAR READING LIGHT 

Unlock retaining spring (1) and remove reflector (2).

Installation: 

Make sure reflector (2) is correctly seated in guide (3).

Fig 1: Identifying Retaining Spring, Reflector And Guide

Courtesy of BMW OF NORTH AMERICA, INC.

Pull bulb (1) in direction of arrow out of reflector (2).

Installation: 

Note TYPE OF BULB .

Fig 2: Pulling Bulb Out Of Reflector

Courtesy of BMW OF NORTH AMERICA, INC.