62 30 005 Removing and installing/replacing trim for head-up display

Special tools required:

Lever out trim for head-up display (1) with special tool 00 9 317 from mounting points (2).

Feed trim for head-up display (1) in direction of arrow out of instrument panel trim (2) and remove.

Fig 1: Removing Instrument Panel Trim With Special Tool (00 9 317)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Make sure retaining lugs (1) and (2) and sleeve (3) of trim for head-up display (4) are correctly seated.

Fig 2: Identifying Retaining Lugs And Sleeve

Courtesy of BMW OF NORTH AMERICA, INC.