51 42 019 Removing and installing/replacing door handle on rear left or right door trim panel (up to 03/2007)
Necessary preliminary tasks:
- Remove REAR DOOR TRIM PANEL
Release nuts (1 and 2).
Lever inside handle (1)
- out of upper screw fastening points
- and pull off upwards from door trim panel (2)
Installation:
Screws (1) and fixtures of inside handle (2) must not be damaged.
Replacement:
Feed inside handle (1) in direction of arrow out of decorative strip (2) and remove.
Installation:
Catches (1) on decorative strip (2) must not be damaged.