51 24 Rear lid locks
TIGHTENING TORQUE SPECIFICATIONS - REAR LID LOCKS
| Type | Tightening specification | Measure | |
|---|---|---|---|
| 1AZ Banjo bolt to hydraulic unit and to hydraulic cylinder | E39/ Touring | 1 0+2.5 Nm | |
| E65/ E66/ E67 | 15 Nm | ||
| 2AZ Oil filler plug to hydraulic unit | E65/ E66/ E67/ E39/ Touring | 8+2 Nm | |
| E61 | 1+0.3 Nm | ||
| 3AZ Engine bolt to hydraulic unit | E65/ E66/ E67 | 5+1.52 Nm | |
| 4AZ Hydraulic unit to bracket | E61 | 2+ +1.5 Nm | |
| E65/ E66/ E67 | 10 Nm | ||
| 5AZ Rear lid lock to rear lid | E60/ E63/ E64/ E65/ E66/ E67/ E85/ E86 | 10 Nm | |
| 6AZ Striker to body | E60/ E63/ E64/ E65/ E66/ E67/ E85/ E86 | 10 Nm | |
| 7AZ Bracket, hydraulic unit, to body | E65/ E66/ E67 | 10 Nm | |
| 8AZ Bracket, angle sensor, to body | E65/ E66/ E67 | 7 Nm | |
| 9AZ Valve to hydraulic unit | E65/ E66/ E67 | 14 Nm | |
| 10AZ Ball pin for hydraulic cylinder to body | E61 | Install with Loctite 270 | 41 Nm |