61 31 287 Removing and installing/replacing dynamic driving switch (Sport button)
Special tools required:
Necessary preliminary tasks:
- Remove TRIM FOR PRESELECTOR LEVER. See 51 16 210 REMOVING AND INSTALLING/REPLACING TRIM FOR PRESELECTOR LEVER (FROM 03/2007)
Release screws (1).
If necessary, lever out actuation trim (4) with special tool 64 1 020 and remove.
Remove driving dynamics switch (2) in direction of arrow from finisher for preselector lever (3).
Version with automatic sport transmission:
Unlock catches (1).
Remove Sport button (2) in direction of arrow from trim for preselector lever (3).
Installation:
Make sure Sport button (2) is correctly seated on trim for preselector lever (3).