61 31 233 Removing and installing/replacing Lane Departure Warning motor electronic (sport steering wheel)

Necessary preliminary tasks:

Release screws (1) and remove retaining plate (2).

Tightening torque 32 33 2AZ .

Fig 1: Identifying Retaining Plate Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Release screw (2).

Release screws (3) and remove motor electronic (4) complete with electrical wires.

Installation:

Replace screws (2 and 3).

Ensure correct cable routing.

Fig 2: Identifying Motor Electronic Screws And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.