11 12 Cylinder Head with Cover
TIGHTENING TORQUE SPECIFICATIONS - CYLINDER HEAD WITH COVER
| Type | thread | Measure | |
|---|---|---|---|
| 11AZ Cylinder head cover | All | M6 | 10 Nm |
| All | M7 | 15 Nm | |
| M21 | M8 | 15 Nm | |
| 12AZ Oil trap to cylinder head cover | M21 | M8 | 17 Nm |
| 13AZ Timing case to cylinder head | All | M7 | 15 Nm |
| All | M8 | 20 Nm | |
| 14AZ Plug for oil channel (microencapsulated) | M47 / M57 | M12 x1.5 | 20 Nm |
| 15AZ Vent plugs to cylinder head (coolant) | M67 | 2Nm |