51 16 366 Removing and installing right glovebox with housing

Necessary preliminary tasks: 

• Remove footwell side trim panel on A-pillar on right.  
• If necessary, remove trim for instrument panel at bottom right  

Unclip pin (1) from retaining strap (2).

Fig 1: Uncliping Pin From Retaining Strap

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip pin (1) from shock absorber (2).

Fig 2: Uncliping Pin From Shock Absorber

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Release screws (2) and pull back right glovebox with housing (3).

Disconnect associated plug connections and remove right glovebox with housing (3).

Fig 3: Removing Right Glovebox With Housing

Courtesy of BMW OF NORTH AMERICA, INC.