51 21 300 Removing and installing or replacing window cavity cover strip on outside of left or right front door
Special tools required:
- 00 9 324 . See MAINTENANCE AND GENERAL INFORMATION - SPECIAL TOOLS .
IMPORTANT:
Observe procedure
for using special tool 00 9 324
.
IMPORTANT:
If reusing the existing window cavity cover strip (1), make sure it is not bent.
Lever out window cavity cover strip (1) with special tool 00 9 324 (starting at B-pillar).
Pull window cavity cover strip (1) out of door mirror (2) in direction of arrow.
Installation:
Coat window cavity cover strip (1) with water before fitting. Window cavity cover strip (1) must be flush at rear to door edge.
Installation:
Seal (1) must be correctly fitted in cover strip (2).