63 17 060 Removing and installing/replacing left or right front fog lamp (M aerodynamic kit)

Necessary preliminary tasks:

Release screws (1).

Remove fog lamp wheel arch cover (2).

Fig 1: Identifying Screws And Fog Lamp Wheel Arch Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Release screws (2). Tightening torque 63 17 1AZ .

Feed fog lamp (3) in direction of arrow out of mounting (4) and remove.

Fig 2: Removing Fog Lamp Out Of Mounting

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

If necessary, remove bulb.