51 11... Removing and installing/replacing cover for headlight washer unit on left

Special tools required: 

• 00 9 341  . See MAINTENANCE AND GENERAL INFORMATION - SPECIAL TOOLS .

Version without headlight washer unit (SRA): 

• With bumper trim fitted, unclip cover (1) with special tool 00 9 341  .
• With bumper trim removed, unclip cover (1) from inside.
  Fig 1: Uncliping Cover With Special Tool

  Courtesy of BMW OF NORTH AMERICA, INC.

Press catch together.

Feed cover (1) out of carrier (2).

Version with headlight washer unit: 

Carefully open out cover (1).

Press catches (2) together and feed out cover (1) in outward direction.

Removing lever for headlight washer unit cover: 

Remove bumper trim.  

Release spring (1) and remove lever (2).