3.2 Removing sealant

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, 2012 BMW 760Li, and 2011 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

Hydrochloric acid is created when PVC sealing material is heated to temperatures in excess of 180 °C.
Remove PVC sealant with a rotating wire brush only or heat material with a hot air blower to max. 180°C and remove with a spatula.
Ensure that all enclosed areas are well ventilated or are provided with direct extractor facilities.