Opening bonded connections
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, 2012 BMW 760Li, and 2011 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
If necessary, open existing PUNCH OR BLIND RIVETS .
Roughly cut out damaged component.
WARNING:
Extract vapors and gases.
Use personal protective clothing/equipment.
Use personal protective clothing/equipment.
Heat adhesive flange with a hot-air blower. Heat components to max. 250 °C object temperature.
The component can be peeled with the aid of pliers. Do not damage adjacent components.
Remove adhesive residue from connecting flange.