62 11 280 Removing and installing (replacing) instrument cluster

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD PROTECTION)

IMPORTANT: Risk of damage!
Carry out this operation carefully so as to avoid damaging the instrument panel.

Extend steering wheel completely and lower.

Release screws (1). Tightening torque 62 11 1AZ

Pull instrument cluster (2) forward slightly in direction of arrow.

Disconnect associated plug connection.

Fig 1: Pulling Instrument Cluster

Courtesy of BMW OF NORTH AMERICA, INC.

If necessary, feed out/unclip associated wiring harness.

Remove instrument cluster (2).

Replacement:

Check values for Condition Based Service (CBS) and correct if necessary.