4111516 Replacing Front Left Or Right Carrier Support (Partial Replacement, Front Side Panel Removed): Notes

Read contents of BODY, GENERAL .

STRIP DOWN VEHICLE .

NOTE: Observe new procedure for bonding and riveting (REPAIR STAGE 2) .
Carry over schematic representation to the relevant vehicle type.

• Carrier support, wheel arch, outer

Following CONSUMABLES  are required:

CONSUMABLES

Material	Quantity
Adhesive K5a	1
Blind rivets N1	2
Blind rivets N3	6
Punch rivets N5	12
CleanerR1	1
Cavity sealing wax remover	1
Sealing compoundD1

Fig 1: Identifying Carrier Support, Wheel Arch, Outer

Courtesy of BMW OF NORTH AMERICA, INC.