5112... Predrill mounting holes for RDC trigger transmitter (only applicable to construction period from 03/09 to 09/09 with M Technic aerodynamic package)

Holes in each case with 7 mm dia.

Dimensions for left side:

A₁ = 18 mm

B₁ = 45 mm

C₁ = 88.5 mm

D₁ = 89 mm

Fig 1: Identifying Retaining Clip Installation Position (Left Side)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Fit left RDC trigger transmitter with plug connection facing upwards. Installation position of retaining clip (1) as pictured.

Holes in each case with 7 mm dia.

Dimensions for right side:

A₂ = 21.5 mm

B₂ = 86.5 mm

C₂ = 90 mm

D₂ = 42.5 mm

Installation:

Fit right RDC trigger transmitter with plug connection facing downwards.

Fig 2: Identifying Retaining Clip Installation Position (Right Side)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Secure RDC trigger transmitter with M6x16 screws (part no. 07 11 9 904 371) and self-locking nuts with washers (part no. 07 11 9 900 299).

Tightening torque: 6 Nm.