12 41 Starter motor with mounting
TIGHTENING TORQUE SPECIFICATION - STARTER MOTOR WITH MOUNTING
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Starter motor mounting to crankcase | N52/N52K/N51/N53 | M10x85 | Replace screw Jointing torque Torque angle |
20 Nm 180 ° |
| 2AZ Starter motor mounting to crankcase | N52/N52K/N51/N53 | M10x30 | Replace screw Jointing torque Torque angle |
20 Nm 90 ° |
| 3AZ Battery positive lead to starter | N52/N52K/N51/N53 | M8 | 13 Nm |