Illustration shows cylinder head cover
Release screws and remove holder (1).
Tightening torque 12 52 1AZ .
CYLINDER HEAD COVER ILLUSTRATION CHART
| Work step | Note |
|---|---|
| Unlock plug connections on control sensors and disconnect | |
| Unlock plug on alternator and disconnect | |
| Unlock plug connection on knock sensors and disconnect | |
| Unlock plug on crankshaft sensor and disconnect | |
| Unlock plug on starter motor and disconnect | |
| Unlock plug connections on monitor sensors and disconnect | |
| Unlock plug on oil condition sensor and disconnect |
NOTE:
Check stored fault messages.
Delete fault memory.