22 11 011 Replacing Left Engine Mount (N54)

Necessary preliminary tasks: 

• Secure engine in INSTALLATION POSITION .
• Remove underbody protection.

Remove stiffening strut (1).

Release screws (2) and remove engine mount.

Tightening torque 22 11 1AZ .

Installation: 

Rubber section (1) of engine mount must point to middle of vehicle.

Engine mount designations:

Right engine mount

• Even component number

Left engine mount

• Odd component number
  Fig 2: Identifying Rubber Section Of Engine Mount

  Courtesy of BMW OF NORTH AMERICA, INC.