25 16 065 Replacing Gaiter (Selector Lever Cover) For Shift Tower

Necessary preliminary tasks: 

• Remove handle. See REPLACING GRIP/KNOB FOR SHIFT LEVER .

1. Carefully pull gaiter taut on leather.
2. Press frame inwards slightly until catch is released.
3. Lift out gaiter.
   Fig 1: Removing Gaiter

   Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Retaining lugs must not be damaged.

Fig 2: Locating Retaining Lugs

Courtesy of BMW OF NORTH AMERICA, INC.