33 32 Control Arms And Struts
CONTROL ARMS AND STRUTS - TORQUES SPECIFICATION TABLE
| - | Type | Thread | Tightening specification | Measure |
|---|---|---|---|---|
| 1AZ Trailing arm to rear axle carrier | E81, E82, E87, E88, E90, E91, E92, E93 | M12 | Replace nut tighten in normal position |
100 Nm |
| 2AZ Trailing arm to wheel carrier | E81, E82, E87, E88, E90, E91, E92, E93 | M12 | Replace nut tighten in normal position |
100 Nm |
| 3AZ Control arm to rear axle support | E81, E82, E87, E88, E90, E91, E92, E93 | M12 | Replace nut tighten in normal position |
100 Nm |
| 4AZ Traction strut to wheel carrier | E81, E82, E87, E88, E90, E91, E92, E93 | M12 | Replace screw tighten in normal position |
- |
| - | - | - | Jointing torque | 100 Nm |
| - | - | - | Torque angle | 90° |
| 5AZ Control arm to rear axle carrier | E81, E82, E87, E88, E90, E91, E92, E93 | M12 | Replace nut tighten in normal position |
100 Nm |
| 6AZ Control arm to wheel carrier | E81, E82, E87, E88, E90, E91, E92, E93 | M12 | Replace screw tighten in normal position |
- |
| - | - | - | Jointing torque | 100 Nm |
| - | - | - | Torque angle | 90° |
| 7AZ Toe arm to rear axle carrier | E81, E82, E87, E88, E90, E91, E92, E93 | M12 | Replace nut tighten in normal position |
100 Nm |
| 8AZ Toe arm to wheel carrier | E81, E82, E87, E88, E90, E91, E92, E93 | M12 | tighten in normal position | 100 Nm |
| 9AZ Camber arm to rear axle carrier | E81, E82, E87, E88, E90, E91, E92, E93 | M14 | Replace nut tighten in normal position |
165 Nm |
| 10AZ Camber arm to wheel carrier | E81, E82, E87, E88, E90, E91, E92, E93 | M14 | Replace nut tighten in normal position |
165 Nm |
| 11AZ Tension strut to body | E81, E82, E92/Except S65 | M8 | - | 24 Nm |
| 12AZ Tension strut to compression strut | E81 | M12 | Jointing torque | 56 Nm |
| - | - | - | Torque angle | 90° |
| - | E82, E92/Except S65 | M12 | Jointing torque | 100 Nm |
| - | - | - | Torque angle | 90° |