61 0 300 Releasing Tool (Complete Kit)

Minimum set: Measuring and testing equipment

NOTE: Replaces from 09/2005 special tool 61 1 150. From 06/2006 extended by tools 61 0 325 - 61 0 331 (see SI 02 05 06 294). From 02/2008 extended by 61 0 332 and 61 0 333 (see SI 02 03 08 440).

Series: E30, E30/C, E30tou, E31, E32, E32/3, E34, E34tou, E36, E36/2, E36/3, E36/5, E36/7, E36/C, E36tou, E38, E38/3, E39, E39PL, E39tou, E46, E46/16, E46/2, E46/3, E46/5, E46/C, E52, E53, E60, E61, E63, E64, E65, E66, E67, E68, E70, E71, E81, E82, E83, E85, E86, E87, E88, E90, E91, E92, E93, F01, F02, R50, R52, R53, R55, R56, RR1, RR2, RR3

Fig 1: Identifying 61 0 300 Releasing Tool (Complete Kit)

Courtesy of BMW OF NORTH AMERICA, INC.

SI number: 2 05 05 (217)

Order number: 61 0 300 Releasing tool (complete kit)

Consisting of:

1 = 61 0 301 Release tool for round contacts (diameter 1.5)

NOTE: Replaces from 09/2005 special tool 61 1 131

2 = 61 0 302 Replacement sleeve D=1.5

NOTE: Replaces from 09/2005 special tool 61 1 157

In conjunction with: 61 3 301

3 = 61 0 303 Release tool for round systems with D=2.5

NOTE: Replaces from 09/2005 special tool 61 1 132

4 = 61 0 304 Replacement sleeve (D=2.5)

NOTE: Replaces from 09/2005 special tool 61 1 156

5 = 61 0 305 Release tool for round contacts (D=3.5)

NOTE: Replaces from 09/2005 special tool 61 1 133

6 = 61 0 306 Replacement sleeve (D=3.5) for 61 0 305

NOTE: Replaces from 09/2005 special tool 61 1 155

7 = 61 0 307 Release tool for socket-side round contacts (D=1.5)

8 = 61 0 308 Replacement sleeve for special tool 61 0 307 (D=1.5)

9 = 61 0 309 Release tool for pin-side round contact (D=1.5) manufacturer: Kostal

NOTE: Replaces from 09/2005 special tool 61 1 139

10= 61 0 311 Replacement sleeve for special tool 61 0 309

NOTE: Replaces from 09/2005 special tool 61 1 154

11= 61 0 312 Release tool for flat spring contact with a retaining lug (1.6 mm)

NOTE: Replaces from 09/2005 special tool 61 1 134

12= 61 0 313 Release tool for flat spring contacts with a snap-in pin (1.9 mm)

NOTE: Replaces from 09/2005 special tool 61 1 137

13= 61 0 314 Release tool for flat spring contact with a snap-in pin (2.7 mm)

NOTE: Replaces from 09/2005 special tool 61 1 135

14= 61 0 315 Release tool for flat spring contacts with double snap-in pin "Micro-Timer 2"

NOTE: Replaces from 09/2005 special tool 61 1 151

15= 61 0 316 Release tool for flat spring contacts with double snap-in pin "SPT 4.8" "JPT 2.8"

NOTE: Replaces from 09/2005 special tool 61 1 136

16= 61 0 317 Release tool for LSK 8

NOTE: Replaces from 09/2005 special tool 61 1 200

17= 61 0 318 Release tool for "Maxi Power Timer 9.5"

NOTE: Replaces from 09/2005 special tool 61 1 180

19= 61 0 321 Release tool for sensor laminated contacts with unlocking element ("SLK 2.8")

20= 61 0 322 Release tool for mini laminated contact ("MLK 1.2 mm")

21= 61 0 323 Release tool for flat spring contacts with a snap-in pin (MQS)

NOTE: Replaces from 09/2005 special tool 61 1 152

22= 61 0 324 Release tool for secondary locking

NOTE: Universal tool for damage-free opening/removal of secondary locks

23= 61 0 329 Case with foam inlay without tools

NOTE: Storage system for release tools from set 61 0 300

24= 61 0 325 Release tool "JPT"

25= 61 0 326 Release tool "MQS"

NOTE: For releasing all micro contacts

26= 61 0 327 Plug-in aid

NOTE: For inserting contacts (0.64 - 1.2 mm) in housing

27= 61 0 328 Plug-in aid

NOTE: For inserting contacts (2.8 - 4.8 mm) in housing

28= 61 0 331 Release tool "SLK 5.8"

NOTE: For release "SLK 5.8 mm" contacts

29= 61 0 332 Release tool

NOTE: For releasing "MQS 0.64 mm" contacts

30= 61 0 333 Release tool

NOTE: For releasing "Mcon 2.8" contacts. Replaces special tool 61 0 319 from 2008.